Product Description
The ET-D75LE95 utilizes a precision-engineered internal mirror system to achieve a remarkably low throw ratio (approximately 0.36:1 to 0.40:1, depending on resolution). This optics-heavy design reduces the required throw distance by up to 60% compared to standard short-throw lenses, allowing a 200-inch image to be produced from a distance of just 1.6 meters (approx. 5.2 feet).
Designed for high-output applications, it supports projectors up to the 32,000-lumen class (e.g., PT-RQ35K/RZ34K). Despite its extreme wide-angle nature, it maintains support for motorized lens shift, providing the critical alignment flexibility needed for edge-blending and complex geometry corrections.
Product Overview
By mounting an ET-D75LE95 Ultra Short Throw lens onto a Panasonic 3-Chip DLP™ projector*, throw distances are reduced by as much as 60 % (approximately) in comparison with the ET-D75LE50 Short Throw Lens. The huge space lets users exploit the high brightness and picture quality offered by 3-Chip DLP™ Panasonic projectors in spaces where limitations previously existed.
Fit an ET-D75LE95 lens onto one of our 3-Chip DLP™ projectors and produce a 200-inch-diagonal image at a distance** of just 1.6 m (approximately).
Screen sizes of up to 600 inches diagonal are supported. Exclusive technology inside these lenses opens up new possibilities for imaginative visual presentations.
* See specifications for projectors compatible wit h ET-D75LE95 lens.
** Distance refers to lens tip to screen.
Space-saving Ultra-Short-Throw Lens Delivers High-Brightness Projection
Note: Ensure an unobstructed space of at least 500 mm (1 ft. 8 in.) or more is provided between projector’s rear panel and walls or other structures. If installing in an enclosed space, use of a separate air-conditioning or ventilation system is recommended. If ventilation is insufficient, exhaust heat may accumulate and trip the projector’s protective circuit.
The ET-D75LE95 Ultra Short Throw Lens makes it possible to install large projectors in small spaces and employ them in applications where conventional projection is limited. New opportunities arise for digital signage, use in retail spaces, public exhibitions, and more.
Large On-floor Image Projection
In order to provide sufficient distance to project large images onto floors, major rigging infrastructure, installation on nearby buildings, or special scaffolding is typically required. The ET-D75LE95 makes it possible to project images of the same size from locations nearer the projection plane, greatly simplifying installation.
When projecting onto structures that require the unit to be installed close to the projection surface, a short-throw lens alone may not provide sufficient projection distance. By using a projector fitted with an ET-D75LE95 lens and another mounted with an existing optional lens, greater freedom and flexibility of installation is afforded.
| F-number | 2.5 |
|---|---|
| Focal length (f:) | 7.5 mm |
| Throw ratio | WUXGA/Full HD: Approx. 0.36:1 SXGA+: Approx. 0.39:1 WXGA: Approx. 0.40:1 |
| Lens shift | |
| PT-RQ32K/RQ22K/RQ13K |
|
| RT-RZ31K/RZ21K/RZ12K/ DZ21K/DZ21K2/DZ13K/DZ10K |
|
| PT-DZ16K/DZ16K2 |
|
| RT-RS30K/RS11K/DS20K/ DS20K2/DS12K |
|
| PT-DW17K/DW17K2/DW11K |
|
| Dimensions | 463.5 mm × ø154 mm (18 1/4˝ × ø 6 1/16˝) |
| Weight | Approx. 5.7 kg (12.6 lbs) |
| Supported projectors | PT-RQ35K/RZ34K PT-RQ32K PT-RQ25K/RZ24K/RQ18K/RZ17K PT-RQ22K PT-RQ13K PT-RZ31K/RS30K PT-RZ21K/RS20K PT-RZ16K PT-RZ12K/RS11K PT-DZ21K/DZ21K2/DS20K/DS20K2/DW17K/DW17K2/DZ16K/DZ16K2 PT-DZ13K/DS12K/DW11K/DZ10K/DZ8700/DZ110K/DS8500/DS1100K/DW8300/DW90K |
